STM32F429 + TOUCH LCD

Properties

• microcontroller STM32F429ZIT6 (144 pins) with
  • 32 Bit ARM Cortex-M4 MCU
  • 180 MHz
  • 2 MByte flash
  • 256 KByte RAM
• 2.4″ color touch grafic LCD
  • 2.4 inches
  • 240 x 320 pixel, QVGA
  • illumination
• 64 MBit SDRAM
  • for graficdata with high color depth
• 3 axes acceleration sensor
  • = digital gyroscope
• 6 LEDs
  • 1 for USB communication
  • 1 Power-LED for 3.3 V
  • 2 for own use
  • 2 LEDs for USB on-the-go
• 2 buton
  • 1 for reset
  • 1 for own use
• programmer onboard

Functions

• ST-Link/V2 for programming and debugging onboard
  With the help of a jumper the board also can be used as ST-Link/V2 for programming and debugging external microcontrollers (over SWD-connection)
• power supply of the board over USB or external over 3V e.g. 5V
• 3V and 5V are available for external peripheral equipment
• Connection external peripheral equipments over USB with micro USB-cable
• the pins of the microcontroller are outward over multi-pin connectors

example of use / tutorials

You can find helps for the programming of the display in our download-area and in the follow tutorials.
Please note: The tutorials are only in german.

• STM32 C++ Tutorial.
• AVR C++ Tutorial.
• micro Grafic Library µGL Tutorial.

Recommendation of software

Please Attention that SiSy Microcontroller++ is only in German.
The substantial range of function of this board is optimally supported by SiSy Microcontroller++ for the development of own program. SiSy Microcontroller++ is a software package for designing, writing, dating, burning and checking the self developed program. There are features of an easy development for programming available and its possible to work with UML. The own work will be optimized with a sample program and integrated facilities.
Here you can find continuing information about SiSy Microcontroller++.