ATmega32U4 running at 5V/16MHz

Send an inquiry for this item
Insert a valid name
insert a valid mail
Insert message




  • ATmega32U4 running at 5V/16MHz
  • Supported under Arduino IDE v1.0.1
  • On-Board micro-USB connector for programming
  • 9 x 10-bit ADC pins
  • 12 x Digital I/Os (5 are PWM capable)
  • Rx and Tx Hardware Serial Connections
  • Our Smallest Arduino-Compatible Board Yet!








This tiny little board does all of the neat-o Arduino tricks that you’re familiar with: 9 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite Arduino-compatible boards but this little guy can go just about anywhere. There is a voltage regulator on board so it can accept voltage up to 12VDC. If you’re supplying unregulated power to the board, be sure to connect to the “RAW” pin on not VCC.

This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We’ve also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit.

Microcontroller ATmega32U4
Operating Voltage (logic level) 5 V
Input Voltage (recommended) 7-12 V, or 5V via USB cable
Input Voltage (limits) 6-20 V, or 5V via USB cable
Digital I/O Pins 12 (of which 5 provide PWM output)
Analog Input Pins 4
Flash Memory 32 KB
Clock Speed 16 MHz
Dimensions 0.70″ x 1.30″


There are no reviews yet.

Be the first to review “ARDUINO PRO MICRO”