TOP PRODUCTS

  • 4A 800V RECTIFIER (RS406L)

    Model Number:   RS407L BRIDGE RECTIFER Type:   BRIDGE RECTIFIER Package Type:   Through Hole Max. Forward Voltage:   1.1V Max. Reverse Voltage:   50~1000V Max. Forward Current:   4A Max. Reverse Current:   10uA voltage:   50~1000V package:   KBL current:   4A

  • ESP8266 Wifi MODULE

    ESP8266 Wifi  MODULE  In Pakistan Model No=ESP-01 The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloading all Wi-Fi networking functions from another application processor. Each ESP8266 module comes pre-programmed…

  • Digispark ATtiny85 USB A Developing Board In PakistanDigispark ATtiny85 USB A Developing Board In Pakistan
    Out Of Stock

    Digispark ATtiny85 USB

    Digispark ATtiny85 USB A Developing Board

  • 1Sheeld for iOS Android

    1Sheeld+ for iOS and Android

  • Out Of Stock

    NewMAX SG-1500H

     26,000.00

      Name Maintenance free storage battery 12V 150AH Model SG 1500H Brand NewMAX Standby use 13V-13.26V Cycle use 13.4V - 13.5V Weight Above 15kg Packed loose packing / no packing. Certificates ISO:9002,CE,RoHS Note:Non-spillable rechargeable battery must be recycled  

  • TM4C123GXL TM4C123G

    The Tiva C Series TM4C123G LaunchPad Evaluation Kit is a low-cost evaluation platform for ARM® Cortex™-M4F-based microcontrollers from Texas Instruments. The design of the TM4C123G LaunchPad highlights the TM4C123GH6PM microcontroller with a USB 2.0 device interface and hibernation module. Preloaded RGB quick start application On-board In-Circuit Debug Interface USB 2.0 device interface Motion control PWM…

  • 2.4 INCH TFT LCD

     500.00

    The shield is fully assembled, tested and ready to go. No wiring, no soldering! Simply plug it in and load up library - you 'll have it running in under 10 minutes! . Works best with any classic Arduino ATMEGA328 Board (UNO/Duemilanove/Diecimila).

  • lcd 16X2 GREEN

     160.00

    LCD (Liquid Crystal Display) screen is an electronic display module and find a wide range of applications. A 16x2 LCD display is very basic module

  • Sensor Shield

    Arduino Sensor Shield

  • Leoch Battery 12v 7Ah

     1,400.00

      Name Maintenance free storage battery 12V 7AH Model LP 12V 7AH Brand Leoch Standby use 13V-13.2V Cycle use 13.4V-13.5V Innitial current Less than 3.6A Weight Around 1kg Packed loose packing / no packing. Certificates ISO:9002,CE,RoHS Note:Non-spillable rechargeable battery must be recycled

  • Base NodeMcu IO

    NodeMcu Base / IO Board Builtin power supply and male header .

  • 4 Wheel Robot

     800.00

    Motor supply voltage 3v -> 6v Ideal for Arduino Raspberry pi and other micro processors Size: approx. 20 x 14cm(L x W); Wheel Size:6.5cm (Dia.) x 2.7cm (H) 4 x DC Motors with speed encoders UK Stock, UK Seller, Same day dispatch if ordered before 2pm Item Weight 635 g Package Dimensions 27.7 x 16.3…

  • Leoch Battery 12v 38Ah

     8,200.00

    Name Maintenance free storage battery 12V 38AH Model LP 12V 38AH Brand Leoch Standby use 13V-13.2V Cycle use 13.4V-13.5V Innitial current Less than 3.6A Weight Above 5kg Packed loose packing / no packing. Certificates ISO:9002,CE,RoHS Note:Non-spillable rechargeable battery must be recycled

  • I2C LCD MODULE

     95.00

    I2C LCD MODULE FOR  16x2 and 16x4 lcd IIC/I2C/TWI/SPI Interface Module Serial Board Module

  • Leoch Battery 6v 4.5Ah

     560.00

    Name Maintenance free storage battery 6V 4.5AH Model LP 6V 4.5AH Brand Leoch Standby use 6V-6.2V Cycle use 7.4V-7.5V Innitial current Less than 3.6A Weight 0.56kg Packed loose packing / no packing. Certificates ISO:9002,CE,RoHS Note:Non-spillable rechargeable battery must be recycled

  • Out Of Stock

    RASPBERRY PI GPIO

    This is a T-Cobbler breakout kit used for extending the GPIO interface on Raspberry Pi to breadboard. It helps you to make the connections between Raspberry Pi and breadboard become simple. Compatible with both Raspberry Pi revision A and revision B.

  • ECG Module

    Specifications for this item Brand Name ePro Labs Manufacturer Series Number SEN-0027 Model Number ECG Number of Items 1 Part Number SEN-0027

  • IOIO EMBEDDED

    The IOIO-OTG (pronounced “yo-yo-O-T-G"; the OTG stands for On-The-Go) is a development board specially designed to allow developers to add advanced hardware I/O capabilities to their Android or PC application. It features a PIC microcontroller, which acts like a bridge that connects an app on your PC or Android device to low-level peripherals like GPIO, PWM, ADC,…

  • BT139 TRIAC

     20.00

    BTA139 TRIAC 16AMP 600V TRIAC. Direct triggering from low power drivers and logic ICs • High blocking voltage capability • Low holding current for low current loads and lowest EMI at commutation • Planar passivated for voltage ruggedness and reliability • Triggering in all four quadrants • Very sensitive gate

  • 8 CHANNEL RELAY

     400.00

    Arduino , pic , Atmel , Avr , Respberry pi compatible relay module. Application. Switching of dc and ac loads like H BRIDGE , ROBOT'S , HOME AUTOMATION DC motors, AC motors, LED lights, Fan , Exhaust, Bulbs etc.

NEW PRODUCTS

HIGH QUALITY

High performance boards and components to build such flawless Circuit.

LOW PRICE

We directly connected with Manufecturing companies of all electronic parts, so the price you will get from us will be the best.